OEM/ODM Supplier Q-Switched Cr Yag - Ho: YAG Crystals – Dien


Product Detail

Related Video

Feedback (2)

As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for High Damaged Threshold Laser Crystals, 2.1um Laser Crystal, Interference Filters, With a wide range, top quality, reasonable rates and stylish designs, our products are extensively used with this industries and other industries.
OEM/ODM Supplier Q-Switched Cr Yag - Ho: YAG Crystals – Dien Detail:

Ho:YAG Ho3+ ions doped into insulating laser crystals have exhibited 14 inter-manifold laser channels, operating in temporal modes from CW to mode-locked . Ho:YAG is commonly used as an efficient means to generate 2.1-μm laser emission from the 5I7- 5I8 transition, for applications such as laser remote sensing, medical surgery, and pumping Mid-IR OPO’s to achieve 3-5micron emission. Direct diode pumped systems,and Tm: Fiber Laser pumped system have demonstrated hi slope efficiencies, some approaching the theoretical limit.


Basic Properties

Ho3+ concentration range 0.005 – 100 atomic %
Emission Wavelength 2.01 um
Laser Transition 5I75I8
Flouresence Lifetime 8.5 ms
Pump Wavelength 1.9 um
Coefficient of Thermal Expansion 6.14 x 10-6 K-1
Thermal Diffusivity 0.041 cm2 s-2
Thermal Conductivity 11.2 W m-1 K-1
Specific Heat (Cp) 0.59 J g-1 K-1
Thermal Shock Resistant 800 W m-1
Refractive Index @ 632.8 nm 1.83
Melting Point 1965℃
Density 4.56 g cm-3
MOHS Hardness 8.25
Young’s Modulus 335 Gpa
Crystal Structure Cubic
Standard Orientation <111>
Y3+ Site Symmetry D2
Lattice Constant a=12.013 Å


Technical Parameters

Wavefront distortion L/8per inch @633nm
Extinction ratio >28dB
Wavefront distortion L/8per inch @633nm
Extinction ratio >28dB
Tolerance:Rods with diameter (+0、-0.05)mm,( ±0.5) mm
Surface quality 10/5 Scratch/dig per MIL-O-1380A
Parallelism <10arc seconds
Perpendicularity <5arc minutes
Aperture >90%
Flatness λ/10@ 633 nm
Tolerance:Rods with diameter (+0、-0.05)mm,( ±0.5) mm
Surface quality 10/5 Scratch/dig per MIL-O-1380A
Parallelism <10arc seconds
Perpendicularity <5arc minutes
Aperture >90%
Flatness λ/10@ 633 nm


Absorption coefficient

Er YAG02


Product detail pictures:

OEM/ODM Supplier Q-Switched Cr Yag - Ho: YAG Crystals – Dien detail pictures

OEM/ODM Supplier Q-Switched Cr Yag - Ho: YAG Crystals – Dien detail pictures

OEM/ODM Supplier Q-Switched Cr Yag - Ho: YAG Crystals – Dien detail pictures

OEM/ODM Supplier Q-Switched Cr Yag - Ho: YAG Crystals – Dien detail pictures


Related Product Guide:

Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customers' demands for OEM/ODM Supplier Q-Switched Cr Yag - Ho: YAG Crystals – Dien , The product will supply to all over the world, such as: Gabon, Naples, Islamabad, Since the establishment of our company, we've realized the importance of providing good quality goods and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question points they do not understand. We break down these barriers to ensure you get what you want to the level you expect, when you want it.
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
5 Stars By Barbara from Brazil - 2018.06.18 19:26
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!
5 Stars By Helen from Denmark - 2017.12.09 14:01