Manufacturing Companies for Ktiopo4 - Ce: YAG Crystals – Dien

WhatsApp Send email to us Download as PDF

Product Detail

Feedback (2)

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Bgse Crystal, 2100nm Yag, Er Yag, We have more than 20 years experience in this industry, and our sales are well trained. We can give you the most professional suggestions to meet your products' requirements. Any troubles, come to us!

Manufacturing Companies for Ktiopo4 - Ce: YAG Crystals – Dien Detail:

Ho:YAG Ho3+ ions doped into insulating laser crystals have exhibited 14 inter-manifold laser channels, operating in temporal modes from CW to mode-locked . Ho:YAG is commonly used as an efficient means to generate 2.1-μm laser emission from the 5I7- 5I8 transition, for applications such as laser remote sensing, medical surgery, and pumping Mid-IR OPO’s to achieve 3-5micron emission. Direct diode pumped systems,and Tm: Fiber Laser pumped system have demonstrated hi slope efficiencies, some approaching the theoretical limit.

Basic Properties

Ho3+ concentration range	0.005 – 100 atomic %
Emission Wavelength	2.01 um
Laser Transition	⁵I₇ → ⁵I₈
Flouresence Lifetime	8.5 ms
Pump Wavelength	1.9 um
Coefficient of Thermal Expansion	6.14 x 10^-6 K^-1
Thermal Diffusivity	0.041 cm² s^-2
Thermal Conductivity	11.2 W m^-1 K^-1
Specific Heat (Cp)	0.59 J g^-1 K^-1
Thermal Shock Resistant	800 W m^-1
Refractive Index @ 632.8 nm	1.83
Melting Point	1965℃
Density	4.56 g cm^-3
MOHS Hardness	8.25
Young’s Modulus	335 Gpa
Crystal Structure	Cubic
Standard Orientation	<111>
Y3+ Site Symmetry	D₂
Lattice Constant	a=12.013 Å

Technical Parameters

Wavefront distortion	L/8per inch @633nm
Extinction ratio	>28dB
Wavefront distortion	L/8per inch @633nm
Extinction ratio	>28dB
Tolerance：Rods with diameter	(+0、-0.05)mm,( ±0.5) mm
Surface quality	10/5 Scratch/dig per MIL-O-1380A
Parallelism	<10arc seconds
Perpendicularity	<5arc minutes
Aperture	>90%
Flatness	λ/10@ 633 nm
Tolerance：Rods with diameter	(+0、-0.05)mm,( ±0.5) mm
Surface quality	10/5 Scratch/dig per MIL-O-1380A
Parallelism	<10arc seconds
Perpendicularity	<5arc minutes
Aperture	>90%
Flatness	λ/10@ 633 nm

Absorption coefficient

Er YAG02

Product detail pictures:

Related Product Guide:

We are convinced that with joint endeavours, the small business between us will bring us mutual benefits. We could assure you products quality and competitive selling price for Manufacturing Companies for Ktiopo4 - Ce: YAG Crystals – Dien , The product will supply to all over the world, such as: Qatar, Macedonia, Iraq, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.

Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!