Low MOQ for Nd Yag 1064 Nm - Co:Spinel Crystals – Dien
Low MOQ for Nd Yag 1064 Nm - Co:Spinel Crystals – Dien Detail:
Passive Q-switches or saturable absorbers generate high power laser pulses without the use of electro-optic Q-switches, thereby reducing the package size and eliminating a high voltage power supply. Co2+:MgAl2O4 is a relatively new material for passive Q-switching in lasers emitting from 1.2 to 1.6μm, in particular, for eye-safe 1.54μm Er:glass laser, but also works at 1.44μm and 1.34μm laser wavelengths. Spinel is a hard, stable crystal that polishes well. Cobalt substitutes readily for magnesium in the Spinel host without the need for additional charge compensation ions. High absorption cross section (3.5×10-19 cm2) permits Q-switching of Er:glass laser without intracavity focusing both with flash-lamp and diode laser pumping. Negligible excited-state absorption results in high contrast ratio of Q-switch, i.e. the ratio of initial (small signal) to saturated absorption is higher than 10.
• Suitable for 1540 nm eye-safe lasers
• High absorption section
• Negligible excited state absorption
• High optical quality
• Uniformly distributed Co
• Eye-safe 1540 nm Er:glass laser
• 1440 nm laser
• 1340 nm laser
• Eye-safe laser range finder
| Chemical formula | Co2+:MgAl2O4 |
| Crystal structure | Cubic |
| Lattice parameters | 8.07Å |
| Density | 3.62 g/cm3 |
| Melting Point | 2105°C |
| Refractive Index | n=1.6948 @1.54 µm |
| Thermal Conductivity /(W·cm-1·K-1@25°C) | 0.033W |
| Specific Heat/ (J·g-1·K-1) | 1.046 |
| Thermal Expansion /（10-6 /°C@25°C ） | 5.9 |
| Hardness (Mohs) | 8.2 |
| Extinction Ratio | 25dB |
| Orientation | [100] or [111] < ±0.5° |
| Optical density | 0.1-0.9 |
| Damage Threshold | >500 MW/cm2 |
| Doping concentration of Co2+ | 0.01-0.3 atm% |
| Absorption coefficient | 0 ～ 7 cm-1 |
| Working wavelength | 1200 – 1600 nm |
| Coatings | AR/AR@1540，R<0.2%; AR/AR@1340，R<0.2% |
| Orientation Tolerence | < 0.5° |
| Thickness/Diameter Tolerance | ±0.05 mm |
| Surface Flatness | <λ/8@632 nm |
| Wavefront Distortion | <λ/4@632 nm |
| Surface Quality | 10/5 |
| Parallel | 10〞 |
| Perpendicular | 5ˊ |
| Clear Aperture | >90% |
| Chamfer | <0.1×45° |
| Maximum dimensions | Dia(3-15)×(3-50)mm |
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for Low MOQ for Nd Yag 1064 Nm - Co:Spinel Crystals – Dien , The product will supply to all over the world, such as: Suriname, Japan, St. Petersburg, We hope to have long-term cooperation relationships with our clients. If you are interested in any of our products, please do not hesitate to send enquiry to us/company name. We ensure that you can be totally satisfied with our best solutions!
By Dana from Algeria - 2018.09.08 17:09
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Flora from Victoria - 2018.11.04 10:32
Products categories
-
Phone
Phone
-
Email
Email
-
whatsapp
whatsapp
-
Wechat
Wechat
-
Top
