Good quality Far Infrared Crystal - Ce: YAG Crystals – Dien

WhatsApp Send email to us Download as PDF

Product Detail

Feedback (2)

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Co Doped Spinel, Co Spinel, Narrow Band Interference Filter, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!

Good quality Far Infrared Crystal - Ce: YAG Crystals – Dien Detail:

Ho:YAG Ho3+ ions doped into insulating laser crystals have exhibited 14 inter-manifold laser channels, operating in temporal modes from CW to mode-locked . Ho:YAG is commonly used as an efficient means to generate 2.1-μm laser emission from the 5I7- 5I8 transition, for applications such as laser remote sensing, medical surgery, and pumping Mid-IR OPO’s to achieve 3-5micron emission. Direct diode pumped systems,and Tm: Fiber Laser pumped system have demonstrated hi slope efficiencies, some approaching the theoretical limit.

Basic Properties

Ho3+ concentration range	0.005 – 100 atomic %
Emission Wavelength	2.01 um
Laser Transition	⁵I₇ → ⁵I₈
Flouresence Lifetime	8.5 ms
Pump Wavelength	1.9 um
Coefficient of Thermal Expansion	6.14 x 10^-6 K^-1
Thermal Diffusivity	0.041 cm² s^-2
Thermal Conductivity	11.2 W m^-1 K^-1
Specific Heat (Cp)	0.59 J g^-1 K^-1
Thermal Shock Resistant	800 W m^-1
Refractive Index @ 632.8 nm	1.83
Melting Point	1965℃
Density	4.56 g cm^-3
MOHS Hardness	8.25
Young’s Modulus	335 Gpa
Crystal Structure	Cubic
Standard Orientation	<111>
Y3+ Site Symmetry	D₂
Lattice Constant	a=12.013 Å

Technical Parameters

Wavefront distortion	L/8per inch @633nm
Extinction ratio	>28dB
Wavefront distortion	L/8per inch @633nm
Extinction ratio	>28dB
Tolerance：Rods with diameter	(+0、-0.05)mm,( ±0.5) mm
Surface quality	10/5 Scratch/dig per MIL-O-1380A
Parallelism	<10arc seconds
Perpendicularity	<5arc minutes
Aperture	>90%
Flatness	λ/10@ 633 nm
Tolerance：Rods with diameter	(+0、-0.05)mm,( ±0.5) mm
Surface quality	10/5 Scratch/dig per MIL-O-1380A
Parallelism	<10arc seconds
Perpendicularity	<5arc minutes
Aperture	>90%
Flatness	λ/10@ 633 nm

Absorption coefficient

Er YAG02

Product detail pictures:

Related Product Guide:

We believe in: Innovation is our soul and spirit. Quality is our life. Customer need is our God for Good quality Far Infrared Crystal - Ce: YAG Crystals – Dien , The product will supply to all over the world, such as: Jeddah, Bogota, Rotterdam, Our company has always insisted on the business principle of "Quality, Honest, and Customer First" by which we have won the trust of clients both from at home and abroad. If you are interested in our products, please do not hesitate to contact us for further information.

It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.

By Yannick Vergoz from Kazakhstan - 2018.06.28 19:27

The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.

By Jean from Luxembourg - 2017.05.02 18:28