Featured - Part 498

Best Price for Alo3 Perovskite Yap - TSAG crystal – Dien

TSAG Faraday crystal is an ideal magneto-optical crystal, which is mainly used in the wavelength range of 400-1600 nanometers, namely the visible and infrared bands. TSAG is an indispensable crystal for the next generation of high-power lasers due to its advantages of high constant, good thermal and mechanical properties. Compared with TGG, the Verdet constant at 1064 nm of TSAG is 20 % higher and the absorption is 30 % lower. Recently, the optical and scintillation properties of TSAG (Tb3Sc2...
Special Design for Windows For Infrared Band - Cr4 +: YAG Crystals – Dien

Cr4+:YAG is an ideal material for passive Q-switching of Nd:YAG and other Nd and Yb doped lasers in the wavelength range of 0.8 to 1.2um.It is superior stability and reliability, long service life and high damage threshold. Advantages of Cr4+:YAG • High chemical stability and reliability • Being easy to be operated • High damage threshold (>500MW/cm2) • As high power, solid state and compact passive Q-Switch • Long life time and good thermal conductivity Basic Properties: • Cr 4+ :YAG sho...
Manufactur standard Q Switched Crystal For1064nm - Achromatic Depolarizers – Dien

These achromatic depolarizers consist of two crystal quartz wedges, one of which is twice as thick as the other, that are separated by a thin metal ring. The assembly is held together by epoxy that has been applied only to the outside edge (i.e., the clear aperture is free from epoxy), which results in an optic with a high damage threshold. These depolarizers are available uncoated for use in the 190 – 2500 nm range or with one of three antireflection coatings deposited on all four surf...
Hot Selling for Laser Lamp - Nd:YVO4 Crystals – Dien

Nd:YVO4 is the most efficient laser host crystal for diode pumping among the current commercial laser crystals, especially, for low to middle power density. This is mainly for its absorption and emission features surpassing Nd:YAG. Pumped by laser diodes, Nd:YVO4 crystal has been incorporated with high NLO coefficient crystals ( LBO, BBO, or KTP) to frequency-shift the output from the near infrared to green, blue, or even UV. This incorporation to construct all solid state lasers is an ideal ...
18 Years Factory Passive Q-Switches - Zero-Order Waveplates – Dien

The zero order waveplate is designed to give a retardance of zero full waves, plus the desired fraction.Zero order waveplate shows better performance than multiple order wavepalte.It has broad bandwidth and a lower sensitivity to temperature and wavelength changes.It should be considered for more critical applications.
Good Wholesale Vendors – Low Order Waveplate – Dien

Low Order Waveplatesare much better than the multi-order wave-plates because of its thinnerthickness less than 0.5 mm). Better temperature(~36°C), Wavelength(~1.5 nm) and incident angle(~4.5°) bandwidth and high damage thresholdmake it widely used in common application. Also it is economical. Recommend Standard Wavelength： 266nm,355nm,532nm,632.8nm,780nm,808nm,980nm,1064nm,1310nm,1550nm