• New Fashion Design for Yag Q-Switch - Cr4 +: YAG Crystals – Dien

    New Fashion Design for Yag Q-Switch - Cr4 +: YAG Crystals – Dien

    Cr4+:YAG  is an ideal material for passive Q-switching of Nd:YAG and other Nd and Yb doped lasers in the wavelength range of 0.8 to 1.2um.It is superior stability and reliability, long service life and high damage threshold. Advantages of Cr4+:YAG • High chemical stability and reliability • Being easy to be operated • High damage threshold (>500MW/cm2) • As high power, solid state and compact passive Q-Switch • Long life time and good thermal conductivity Basic Properties: • Cr 4+ :YAG sho...
  • Hot New Products Aggas2 Crystal - LiNbO3 Crystals – Dien

    Hot New Products Aggas2 Crystal - LiNbO3 Crystals – Dien

    LiNbO3 Crystal has unique electro-optical, piezoelectric, photoelastic and nonlinear optical properties. They are strongly birefringent. They are used in laserfrequency doubling, nonlinear optics, Pockels cells, optical parametric oscillators, Q-switching devices for lasers, other acousto-opticdevices, optical switches for gigahertz frequencies, etc. It is an excellent material for manufacture of optical waveguides, etc. Usually LiNbO3 wafer is indexed as X cut, Y cut or Z cut with trigonal s...
  • Hot New Products Aggas2 Crystal - Wollaston Polarizer – Dien

    Hot New Products Aggas2 Crystal - Wollaston Polarizer – Dien

    Wollaston polarizer is designed to separate unpolarized light beam into two orthogonally polarized ordinary and extraordinary components which are symmetrically deflected from axis of initial propagation. This kind of performance is attractive for laboratory experiments as both ordinary and extraordinary beams are accessible. Wollaston polarizers are used in spectrometers also can be used as polarization analyzers or beamsplitters in optical setups. Feature: Separate Unpolarized Light into T...
  • Factory wholesale Agse2 - CaF2 Windows – Dien

    Factory wholesale Agse2 - CaF2 Windows – Dien

    ZnS is a very important optical crystals applied in IR waveband. Transmitting range of CVD ZnS is 8um-14um, high transmittance, low absorption, ZnS with multi-spectrum level by heating etc. static pressure technics has improved the transmittance of IR and visible range. Zinc Sulphide is produced by synthesis from Zinc vapour and H2S gas, forming as sheets on Graphite susceptors. Zinc Sulphide is microcrystalline in structure, the grain size being controlled to produce maximum strength. Multis...
  • Fast delivery Er Yag - BaGa4Se7 Crystals – Dien

    Fast delivery Er Yag - BaGa4Se7 Crystals – Dien

    High-quality crystals of BGSe (BaGa4Se7) is the selenide analogue of the chalcogenide compound BaGa4S7, whose acentric orthorhombic structure was identified in 1983 and the IR NLO effect was reported in 2009, is a newly developed IR NLO crystal. It was obtained via the Bridgman–Stockbarger technique. This crystal exhibits high transmittance over the wide range of 0.47–18 μm, except for an absorption peak at around 15 μm. The FWHM of the (002) peak rocking curve is about 0.008° and the transmi...
  • PriceList for Cr Yag - TSAG crystal – Dien

    PriceList for Cr Yag - TSAG crystal – Dien

    TSAG Faraday crystal is an ideal magneto-optical crystal, which is mainly used in the wavelength range of 400-1600 nanometers, namely the visible and infrared bands. TSAG is an indispensable crystal for the next generation of high-power lasers due to its advantages of high constant, good thermal and mechanical properties. Compared with TGG, the Verdet constant at 1064 nm of TSAG is 20 % higher and the absorption is 30 % lower. Recently, the optical and scintillation properties of TSAG (Tb3Sc2...