• OEM Supply  – Glan Laser Polarizer – Dien

    OEM Supply – Glan Laser Polarizer – Dien

    Glan Laser prism polarizer is made of two same birefringent material prisms that are assembled with an air space. The polarizer is a modification of the Glan Taylor type and is designed to have less reflection loss at the prism junction. The polarizer with two escape windows allow the rejected beam to escape out of the polarizer, which makes it more desirable for high energy lasers. The surface quality of these faces is relatively poor as compared to that of entrance and exit faces. No scratc...
  • Professional China  Zgp - Glan Taylor Polarizer – Dien

    Professional China Zgp - Glan Taylor Polarizer – Dien

    Glan Taylor polarizer is made of two same birefringent material prisms that are assembled with an air space.Its length to aperture ratio which is less than 1.0 makes it a relatively thin polarizer.The polarizer with no side escape windows is suitable for low to medium power application where the side rejected beams are not required .The angular field of different materials of polarizers is listed below for comparison. Feature: Air-spaced Close to Brewster’s Angle Cutting High Polariza...
  • Excellent quality Laser Crystal - KTP Crystal – Dien

    Excellent quality Laser Crystal - KTP Crystal – Dien

    Gallium Selenide (GaSe) non-linear optical single crystal, combining a large non-linear coefficient, a high damage threshold and a wide transparency range. It is a is very suitable material for SHG in the mid-IR. The frequency-doubling properties of GaSe were studied in the wavelength range between 6.0 µm and 12.0 µm. GaSe has been successfully used for efficient SHG of CO2 laser (up to 9% conversion); for SHG of pulsed CO, CO2 and chemical DF-laser (l = 2.36 µm) radiation; upconversion of CO...
  • China Gold Supplier for Bandpass Interference Filter - BaGa2GeSe6 Crystals – Dien

    China Gold Supplier for Bandpass Interference Filter - BaGa2GeSe6 Crystals – Dien

    The BaGa2GeSe6 crystal has a high optical damage threshold (110 MW/cm2), a wide spectral transparency range (from 0.5 to 18 μm) and a high nonlinearity (d11 = 66 ± 15 pm/V) , which makes this crystal very attractive for frequency conversion of laser radiation into (or within) the mid-IR range. It was proved probably the most efficient crystal for second harmonic generation ofCO- and CO2-laser radiation. It was found that a broadband two-stage frequency conversion of multi-lineCO-laser radiati...
  • Manufacturing Companies for Ktiopo4 - Undoped YAP Crystals – Dien

    Manufacturing Companies for Ktiopo4 - Undoped YAP Crystals – Dien

    YAP with large density,high mechanical strength, stable chemical properties,not soluble in organic acid, alkali resistance, and has higher thermal conductivity and thermal diffusivity. YAP is a ideal laser substrate crystal.
  • China Factory for Xenon Lamp - Low Order Waveplate – Dien

    China Factory for Xenon Lamp - Low Order Waveplate – Dien

    Low Order Waveplatesare much better than the multi-order wave-plates because of its thinnerthickness less than 0.5 mm). Better temperature(~36°C), Wavelength(~1.5 nm) and incident angle(~4.5°) bandwidth and high damage thresholdmake it widely used in common application. Also it is economical. Recommend Standard Wavelength: 266nm,355nm,532nm,632.8nm,780nm,808nm,980nm,1064nm,1310nm,1550nm