We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Ags2, Thz Crystal, Ho Yap, We are confident that there will be a promising future and we hope we can have long term cooperation with customers from all over the world.
Factory wholesale Ir Crystal - Ce: YAG Crystals – Dien Detail:
Ho:YAG Ho3+ ions doped into insulating laser crystals have exhibited 14 inter-manifold laser channels, operating in temporal modes from CW to mode-locked . Ho:YAG is commonly used as an efficient means to generate 2.1-μm laser emission from the 5I7- 5I8 transition, for applications such as laser remote sensing, medical surgery, and pumping Mid-IR OPO’s to achieve 3-5micron emission. Direct diode pumped systems,and Tm: Fiber Laser pumped system have demonstrated hi slope efficiencies, some approaching the theoretical limit.
Basic Properties
Ho3+ concentration range |
0.005 – 100 atomic % |
Emission Wavelength |
2.01 um |
Laser Transition |
5I7 → 5I8 |
Flouresence Lifetime |
8.5 ms |
Pump Wavelength |
1.9 um |
Coefficient of Thermal Expansion |
6.14 x 10-6 K-1 |
Thermal Diffusivity |
0.041 cm2 s-2 |
Thermal Conductivity |
11.2 W m-1 K-1 |
Specific Heat (Cp) |
0.59 J g-1 K-1 |
Thermal Shock Resistant |
800 W m-1 |
Refractive Index @ 632.8 nm |
1.83 |
Melting Point |
1965℃ |
Density |
4.56 g cm-3 |
MOHS Hardness |
8.25 |
Young’s Modulus |
335 Gpa |
Crystal Structure |
Cubic |
Standard Orientation |
<111> |
Y3+ Site Symmetry |
D2 |
Lattice Constant |
a=12.013 Å |
Technical Parameters
Wavefront distortion |
L/8per inch @633nm |
Extinction ratio |
>28dB |
Wavefront distortion |
L/8per inch @633nm |
Extinction ratio |
>28dB |
Tolerance:Rods with diameter |
(+0、-0.05)mm,( ±0.5) mm |
Surface quality |
10/5 Scratch/dig per MIL-O-1380A |
Parallelism |
<10arc seconds |
Perpendicularity |
<5arc minutes |
Aperture |
>90% |
Flatness |
λ/10@ 633 nm |
Tolerance:Rods with diameter |
(+0、-0.05)mm,( ±0.5) mm |
Surface quality |
10/5 Scratch/dig per MIL-O-1380A |
Parallelism |
<10arc seconds |
Perpendicularity |
<5arc minutes |
Aperture |
>90% |
Flatness |
λ/10@ 633 nm |
Absorption coefficient

Product detail pictures:
Related Product Guide:
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Factory wholesale Ir Crystal - Ce: YAG Crystals – Dien , The product will supply to all over the world, such as: Roman, Cyprus, Ireland, If you are for any reason unsure which product to select, do not hesitate to contact us and we will be delighted to advise and assist you. This way we will be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We are looking for more and more customers to create the glorious future.