Factory Supply Aggs Crystal - BBO crystal – Dien


Product Detail

Related Video

Feedback (2)

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Holmium Yag, Opo Crystal, Passive Q-Switchs, We have been in operation for more than 10 years. We are dedicated to quality products and consumer support. We invite you to visit our company for a personalized tour and advanced business guidance.
Factory Supply Aggs Crystal - BBO crystal – Dien Detail:

High-quality crystals of BGSe (BaGa4Se7) is the selenide analogue of the chalcogenide compound BaGa4S7, whose acentric orthorhombic structure was identified in 1983 and the IR NLO effect was reported in 2009, is a newly developed IR NLO crystal. It was obtained via the Bridgman–Stockbarger technique. This crystal exhibits high transmittance over the wide range of 0.47–18 μm, except for an absorption peak at around 15 μm.
The FWHM of the (002) peak rocking curve is about 0.008° and the transmittance through a polished 2 mm thick (001) plate is around 65% over the wide range of 1–14 μm. Various thermophysical properties were measured on crystals.
The thermal expansion behavior in BaGa4Se7 does not exhibit strong anisotropy with αa=9.24×10−6 K−1, αb=10.76×10−6 K−1, and αc=11.70×10−6 K−1 along the three crystallographic axes. The thermal diffusivity/thermal conductivity coefficients measured at 298 K are 0.50(2) mm2 s−1/0.74(3) W m−1 K−1, 0.42(3) mm2 s−1/0.64(4) W m−1 K−1, 0.38(2) mm2 s−1/0.56(4) W m−1 K−1, along the a, b, c crystallographic axis respectively.
In addition, the surface laser damage threshold was measured to be 557 MW/cm2 using a Nd:YAG (1.064 μm) laser under conditions of 5 ns pulse width, 1 Hz frequency, and D=0.4 mm spot size.
BGSe (BaGa4Se7) crystal exhibits a powder second harmonic generation (SHG) response that is approximately 2–3 times that of AgGaS2. The surface laser damage threshold is about 3.7 times that of AgGaS2 crystal under identical conditions.
BGSe crystal has a large nonlinear susceptibility, and may have a broad prospect for practical applications in the mid-IR spectral region.It shows interesting terahertz phonon-polaritons and high nonlinear coefficients for terahertz generation.
Advantages for IR laser output:
Suitable for various pumping source (1-3μm)
Wide tunable IR output range (3-18μm)
OPA, OPO, DFG, intracavity/extravity, cw/pulse pumping
Important notice: Since this this a new type crystal, inside crystal may have few streaks, but we do not accept returnment due to this defect.


Product detail pictures:

Factory Supply Aggs Crystal - BBO crystal – Dien detail pictures

Factory Supply Aggs Crystal - BBO crystal – Dien detail pictures

Factory Supply Aggs Crystal - BBO crystal – Dien detail pictures

Factory Supply Aggs Crystal - BBO crystal – Dien detail pictures


Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory Supply Aggs Crystal - BBO crystal – Dien , The product will supply to all over the world, such as: moldova, Ecuador, Azerbaijan, To get more information about us as well as see all our products, please visit our website. To get more information please feel free to let us know. Thank you very much and wish your business always be great!
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
5 Stars By Charlotte from Milan - 2018.09.08 17:09
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
5 Stars By Ethan McPherson from Maldives - 2017.05.21 12:31