Persisting in "High quality, Prompt Delivery, Aggressive Price", we have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients' higher comments for Q Switch Nd Yag Laser Crystal, Zgp Or Zngep2, Bibo Crystal, We believe that you will be glad with our realistic selling price, high-quality products and solutions and rapid delivery. We sincerely hope you can give us an prospect to provide you and be your best partner!
Factory source Laser Yag Q Switch - Ho: YAG Crystals – Dien Detail:
Ho:YAG Ho3+ ions doped into insulating laser crystals have exhibited 14 inter-manifold laser channels, operating in temporal modes from CW to mode-locked . Ho:YAG is commonly used as an efficient means to generate 2.1-μm laser emission from the 5I7- 5I8 transition, for applications such as laser remote sensing, medical surgery, and pumping Mid-IR OPO’s to achieve 3-5micron emission. Direct diode pumped systems,and Tm: Fiber Laser pumped system have demonstrated hi slope efficiencies, some approaching the theoretical limit.
Basic Properties
Ho3+ concentration range |
0.005 – 100 atomic % |
Emission Wavelength |
2.01 um |
Laser Transition |
5I7 → 5I8 |
Flouresence Lifetime |
8.5 ms |
Pump Wavelength |
1.9 um |
Coefficient of Thermal Expansion |
6.14 x 10-6 K-1 |
Thermal Diffusivity |
0.041 cm2 s-2 |
Thermal Conductivity |
11.2 W m-1 K-1 |
Specific Heat (Cp) |
0.59 J g-1 K-1 |
Thermal Shock Resistant |
800 W m-1 |
Refractive Index @ 632.8 nm |
1.83 |
Melting Point |
1965℃ |
Density |
4.56 g cm-3 |
MOHS Hardness |
8.25 |
Young’s Modulus |
335 Gpa |
Crystal Structure |
Cubic |
Standard Orientation |
<111> |
Y3+ Site Symmetry |
D2 |
Lattice Constant |
a=12.013 Å |
Technical Parameters
Wavefront distortion |
L/8per inch @633nm |
Extinction ratio |
>28dB |
Wavefront distortion |
L/8per inch @633nm |
Extinction ratio |
>28dB |
Tolerance:Rods with diameter |
(+0、-0.05)mm,( ±0.5) mm |
Surface quality |
10/5 Scratch/dig per MIL-O-1380A |
Parallelism |
<10arc seconds |
Perpendicularity |
<5arc minutes |
Aperture |
>90% |
Flatness |
λ/10@ 633 nm |
Tolerance:Rods with diameter |
(+0、-0.05)mm,( ±0.5) mm |
Surface quality |
10/5 Scratch/dig per MIL-O-1380A |
Parallelism |
<10arc seconds |
Perpendicularity |
<5arc minutes |
Aperture |
>90% |
Flatness |
λ/10@ 633 nm |
Absorption coefficient

Product detail pictures:
Related Product Guide:
Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for Factory source Laser Yag Q Switch - Ho: YAG Crystals – Dien , The product will supply to all over the world, such as: Sudan, Eindhoven, luzern, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!