Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for Infrared Material, Kd P Eo Q-Switch, Kta Crystal, We will supply high-quality solutions and fantastic companies at aggressive charges. Start benefiting from our comprehensive providers by contacting us today.
Factory wholesale Ktp 532nm - Ce: YAG Crystals – Dien Detail:
Ho:YAG Ho3+ ions doped into insulating laser crystals have exhibited 14 inter-manifold laser channels, operating in temporal modes from CW to mode-locked . Ho:YAG is commonly used as an efficient means to generate 2.1-μm laser emission from the 5I7- 5I8 transition, for applications such as laser remote sensing, medical surgery, and pumping Mid-IR OPO’s to achieve 3-5micron emission. Direct diode pumped systems,and Tm: Fiber Laser pumped system have demonstrated hi slope efficiencies, some approaching the theoretical limit.
Basic Properties
| Ho3+ concentration range |
0.005 – 100 atomic % |
| Emission Wavelength |
2.01 um |
| Laser Transition |
5I7 → 5I8 |
| Flouresence Lifetime |
8.5 ms |
| Pump Wavelength |
1.9 um |
| Coefficient of Thermal Expansion |
6.14 x 10-6 K-1 |
| Thermal Diffusivity |
0.041 cm2 s-2 |
| Thermal Conductivity |
11.2 W m-1 K-1 |
| Specific Heat (Cp) |
0.59 J g-1 K-1 |
| Thermal Shock Resistant |
800 W m-1 |
| Refractive Index @ 632.8 nm |
1.83 |
| Melting Point |
1965℃ |
| Density |
4.56 g cm-3 |
| MOHS Hardness |
8.25 |
| Young’s Modulus |
335 Gpa |
| Crystal Structure |
Cubic |
| Standard Orientation |
<111> |
| Y3+ Site Symmetry |
D2 |
| Lattice Constant |
a=12.013 Å |
Technical Parameters
| Wavefront distortion |
L/8per inch @633nm |
| Extinction ratio |
>28dB |
| Wavefront distortion |
L/8per inch @633nm |
| Extinction ratio |
>28dB |
| Tolerance:Rods with diameter |
(+0、-0.05)mm,( ±0.5) mm |
| Surface quality |
10/5 Scratch/dig per MIL-O-1380A |
| Parallelism |
<10arc seconds |
| Perpendicularity |
<5arc minutes |
| Aperture |
>90% |
| Flatness |
λ/10@ 633 nm |
| Tolerance:Rods with diameter |
(+0、-0.05)mm,( ±0.5) mm |
| Surface quality |
10/5 Scratch/dig per MIL-O-1380A |
| Parallelism |
<10arc seconds |
| Perpendicularity |
<5arc minutes |
| Aperture |
>90% |
| Flatness |
λ/10@ 633 nm |
Absorption coefficient

Product detail pictures:
Related Product Guide:
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for Factory wholesale Ktp 532nm - Ce: YAG Crystals – Dien , The product will supply to all over the world, such as: Sierra Leone, Stuttgart, Belgium, Our items are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!